| Manufacturer and type: | Zwick 50kN |
| Purpose: | The universal testing machine is used for the definition of basic mechanical characteristics of the materials, in research and development, as well as in control of the quality of materials and quality control of products. |
| Kratki opis metode: | On the mechanical tensile testing machine, a universal tensile test is carried out to determine the behavior of the material at uniaxial static tensile stress. The method determines basic mechanical properties of materials such as yielding, ultimate tensile strength, elongation and contraction. |
| Tehničke značajke: | The basic characteristics of the device are: tensile machine has four measuring ranges 0 - 0.5 kN, 0 - 10 kN, 0 - 25 kN and 0 - 50 kN; stretching speed in range from 0 to 150 mm/min; testing furnace for high temperature testings up to 1200 °C. The device has a mechanical analog recording of diagram on the paper. |
| Standard: | EN 10002-1 |
| Tip i priprava uzorka: | Solid samples of the round or rectangular cross-section, in accordance with norms used for testing. Samples of the round cross-section up to ɸmax = 12 mm and rectangular cross-section up to 10 mm in thickness. |
| Laboratory: | Laboratory for machining of deformation metal |
| Operater: |
|
Faculty of Metallurgy, University of Zagreb
Aleja narodnih heroja 3,
44103 Sisak
The content of this website is the sole responsibility of the Faculty of Metallurgy, University of Zagreb.
