| Manufacturer and type: | Leica, Njemačka/ Germany |
| Purpose: | Used to measure the hardness of each microconstituent by Rockwell method. |
| Kratki opis metode: | Hardness measurement is based on indenter entering material to be tested with segnificant load and dwell time of 10 s. After removing the indenter the imprint is measured and the hardness calculated automatically. |
| Tehničke značajke: | Magnification 100 X and 500 X Loading time 10 s Load 0.010N, 0.049N, 0.098N, 0.147N, 0.245N, 0.490N, 0.980N, 1,1961N, 2.941N, 4.902N, 9.804N, 19.60N |
| Tip i priprava uzorka: | Standard metallographic sample preparation |
| Laboratory: | Laboratory for steel, iron and foundry |
| Operater: |
|
Faculty of Metallurgy, University of Zagreb
Aleja narodnih heroja 3,
44103 Sisak
The content of this website is the sole responsibility of the Faculty of Metallurgy, University of Zagreb.
