| Manufacturer and type: | Testo / Testo 350 XL |
| Purpose: | Serves for analysis of fuel combustion gas composition, pressure measurement, humidity, determination of gas flow rate and degree of combustion efficiency. |
| Kratki opis metode: | The measurement method is based on the application of electrochemical cells. The cells come with dry flue gases from which previously removed moisture in the dryer that is an integral part of the device. Analyzed gas is sucked through a probe that simultaneously measures the gas temperature at the NiCr-Ni (type K) thermocouple. For a higher combustion gas temperature of 1200 ° C (near flame or combustion zone), a 2 m long probe made of ceramic material based on aluminum oxide is used. All measured values can be read, memorized and printed on the control unit, and there is a possibility of storing more data. |
| Tehničke značajke: | The analyzer measures Oxygen (0 to 25 %), Carbon Monoxide (0 to 10 000 ppm), Nitric Oxide (0 to 3 000 ppm), Nitrogen Dioxide (0 to 500 ppm), Sulfur Dioxide (0 to 5 000 ppm) and Temperature (-40 to 2 192 F) and calculates Carbon Dioxide (0 to CO2 max. volume %) and efficiency (0 to 100%). |
| Standard: | ISO 9001 |
| Tip i priprava uzorka: | No sample preparation, but preparing apparatus for sampling |
| Laboratory: | Laboratory for heat engineering and mechanical engineering |
| Operater: |
|
Faculty of Metallurgy, University of Zagreb
Aleja narodnih heroja 3,
44103 Sisak
The content of this website is the sole responsibility of the Faculty of Metallurgy, University of Zagreb.
