Laboratory for steel, iron and foundry
Laboratorij za željezo, čelik i ljevarstvo Laboratorij se bavi teorijskim i praktičnim istraživanjem oplemenjivanja mineralnih sirovina, proizvodnje željeznih i neželjeznih […]
Laboratory for steel, iron and foundry
The system is used to control the melt of gray and nodular cast iron by thermal analysis (recording of the cooling curve)
Laboratory for chemistry, hydrometallurgy and corrosion testing
Determination of metal concentration in solution
Laboratory for the development and application of materials
The furnace is intended for heat treatment (normalization, quenching) of metallic materials (e.g. steel, Cu-alloys, Al-alloys etc.).
Laboratory of Industrial Ecology
Determination of the granulometric composition of a bulk solid sample.
Laboratory for heat engineering and mechanical engineering
The GRAVIMAT SHC 501 is a mobile measuring system for gravimetric determination of the dust content in ducted gas flows.
Laboratory for steel, iron and foundry
Automatic grinding and polishing samples for metallographic analysis.
Laboratory for machining of deformation metal
Hardness testing machine is used to determine the hardness of the material by penetration method,
Laboratory for chemistry, hydrometallurgy and corrosion testing
High-temperature furnace is primarily intended for thermal treatment of samples.
Laboratory for chemistry, hydrometallurgy and corrosion testing
Determination of the dynamic viscosity of the solution
Laboratory for machining of deformation metal
The infrared camera serves as an infra-red radiation detector. By measuring the amount of radiation of a body it is possible to determine its temperature. Infrared cameras have found their purpose in various branches of science, from research in medicine, up to the observation of metallurgical processes during metal production and processing.
Laboratory for heat engineering and mechanical engineering
Contact temperature measurement
Laboratory for heat engineering and mechanical engineering
Serves for analysis of fuel combustion gas composition, pressure measurement, humidity, determination of gas flow rate and degree of combustion efficiency.
Laboratory for heat engineering and mechanical engineering
Noncontact temperature measurement
Laboratory for steel, iron and foundry
Used for capturing microstructure of sample under magnification of 50 X to 1000 X
Laboratory of Industrial Ecology
The pH meter is used to measure the pH of the liquid samples.
Laboratory for chemistry, hydrometallurgy and corrosion testing
The pH meter is used to measure the pH of the liquid samples. Conductometer is used to measure conductivity of liquid samples.
Laboratory for steel, iron and foundry
Used to measure the hardness of each microconstituent by Rockwell method.
Laboratory for steel, iron and foundry
Expendable Celox® Foundry sensor contains a thermocouple for temperature measurements and a special electro-chemical cell.
Laboratory for chemistry, hydrometallurgy and corrosion testing
pH meter is an instrument used to measure of pH solution
Laboratory for chemistry, hydrometallurgy and corrosion testing
Determination of saccharose and fructose concentrations
Laboratory for chemistry, hydrometallurgy and corrosion testing
Electrochemical measurements. Electrochemical impedance spectroscopy of metallic materials in various solutions.
Laboratory for steel, iron and foundry
ProCAST is specialized Finite Elements Method (FEM) simulation software for predictive evaluations of the different casting processes
Laboratory for chemistry, hydrometallurgy and corrosion testing
Electrolitic etching of metal samples
Laboratory of Physics and structural testing
For observing of microstructure / fracture surfaces of metal and non-metallic materials
Laboratory for the development and application of materials
The simultaneous thermal analysis allows the measurement of thermal effects and mass changes
Laboratory for chemistry, hydrometallurgy and corrosion testing
The stalagmometer is a pipette of a certain volume from which the liquid expires through the capillary.
Laboratory for steel, iron and foundry
The stereo microscope is an optical microscope for low magnification observation of a sample.
Laboratory for the development and application of materials
Thermo-Calc software enables determination of stable and metastable phase equilibria of multicomponent metal alloys.
Laboratory for chemistry, hydrometallurgy and corrosion testing
Determination of molar mass of polymeric compound on the basis of kinematic viscosity measurement
Laboratory for machining of deformation metal
The universal testing machine is used for the definition of basic mechanical characteristics of the materials, in research and development, as well as in control of the quality of materials and quality control of products.
Laboratory for chemistry, hydrometallurgy and corrosion testing
Determination of metal corrosion rate by mass loss method and measurement of the produced volume of hydrogen
Faculty of Metallurgy, University of Zagreb
Aleja narodnih heroja 3,
44103 Sisak
The content of this website is the sole responsibility of the Faculty of Metallurgy, University of Zagreb.
